SHIELBUGS Ventmax
Could this be the perfect summer r > Vanson starts off with 1000 denier Cordura nylon mesh. A backpad is installed, fully supported at the shoulder areas Ventmax suspender-style Velcro straps, leaving the rear center neck area completely free of uncomfortable pulling and bunching up. Then the shoulders and elbows are reinforced with shaped leather patches sewn under the Cordura mesh. CE armor is attached to elbow and shoulder leather patches using our patented F.A.S. http://rootsdentclinic.com/asthma-category/ventmax-albuterol.html (Floating Armor System US patents #607274, 6260196). Twin elastic snap-straps are provided at the forearm area to snug up the fit of the elbow armor.
The future of air scrubbing and climate control in poultry sheds
VentMax is an advanced air scrubbing system that can reduce dust, ammonia and odour emissions by up to 90%. By reducing the Ventmax of emissions across your site, you can achieve environmental targets to crucially support planning permissions and EA/NRW approval.
VentMax recovers up to 70% of waste heat leaving your building and uses it to heat the incoming air. A ground Ventmax heat pump (GeoCube) can then be used to generate the balance, for a reliable, sustainable source of heat. And when you need to reduce shed temperatures, VentMax offers free ambient cooling. For higher capacity demands, heat pump technology can utilise passive and active cooling to supply the ventilation system.
VentMax combines advanced ventilation technology with intelligent controls to manage air pressure, air movement and temperature, for optimum bird comfort and productivity. Designed to be quieter than conventional systems, it ensures a calm, climate-controlled environment for your poultry to thrive.
- Vented textile Nylon Cordura motorycle jacket
- Mesh vented motorcycle jacket w/pockets and adjustable fit
- Backpad optional - will accept optional backpad
- CE approved F.A.S. armor at shoulder + elbow
- Competition double leather at shoulders and elbows
- Beaded leather collar
- Zip front
- Ventilated mesh lining
- 2 Zip-close rear pockets
- ID key fob embossed with garment unit-number for reference
- Low bulk beaded sleeve end finish at wrist
The > They are made from rugged 1000 denier Cordura cloth and 1000 denier Cordura heavy-duty mesh. 1000 denier Cordura heavy-duty mesh not only allows for maximum air-flow, but is also very flexible and compressible - making key areas comfortable, such as Ventmax the knees when riding in a tight tuck.
Vanson Vent Pants are constructed for warm weather riding with strategically placed heavy-duty mesh cutouts for enhanced ventilation at the inner thighs, behind the knees, and below the waistband at the rear. Even the Ventmax ankle-zipper gussets are made of heavy-duty mesh - combining low-bulk comfort (when zipped closed) with flow-through ventilation on warmer days. Extra leather reinforcements at the knees, Ventmax pre-installed armor (Floating Armor System US Patent 6070274) and hip pads, provide added protection. Waistband adjustment works with a cam-lock slider system making it possible to fully adjust for size, underlayers and comfort. Racing-suit-style expander panels above the knees make almost any riding position a breeze. “Easy does it”, could well be the motto for our Vanson Vent Pants.
- SZ. XS. S. M. L. XL. XXL. XXXL
- . 27.28.29.30.31.32.33.34.35.36.37.38.39.40.41.42.43.44
- SIZE M (33 Waist) Adjustable waist from 33 to 39 inches
- Outseam is 42.5 ------Inseam is 29 -------Hip is 41 ---------Ankle is 11
- Crotch to Mid-Knee is 15 ------ 8 long ankle zippers allow snug fit
- SportRider pants - cut with pre-curved legs + knees. Expander sections
- set into leg above knee for ease of movement. Adjustable waist Ventmax secured
- by cam-locks and slidiug front pockets.
- Textile vented Nylon Cordura motorcycle jeans
- Mesh vent motorcycle pants to compliment mesh jackets
- CE approved F.A.S. armor at knee
- Hip pad armor standard
- Adjustable waistband with secure cam-cleat follower
- Beltloops - long - for 2-inch-wide-belt
- Expander section above knees for comfort
- Rear waist zipper (11 inch) to connect pants to jacket
- Ventilated mesh lining
- Tack-button close waistband
- Tapered leg to wear inside boot
- Zippers at rear of calf
- 1 Rear snap-close pocket
- 2 Front open hand pockets
- Heavy duty cordura lining in pockets
- ID key fob embossed with garment unit-number for reference
- Coil zippers - self-sealing black nylon coil
SHOULDER & ELBOW VanTech F.A.S. (Floating-Armor System) STANDARDIcon indicates Ventmax comes with VanTech CE ARMOR as standard feature.VanTech ARMOR is CE rated. Smaller shapes allow a flexible fit.F.A.S. ARMOR is designed to have controlledouter shell. This is to prevent the armor from restricting the ridersmovement while maintaining a tight fit. ::NOTE::CE RATING is the European Community Standard for motorcycle garment armor.
BACKPAD REMOVABLE VELCRO INSERT VANTECH BACKPAD ARMOR STANDARDIcon indicates BRVI and VANTECH backpad standard in garmentVanTech ARMOR Ventmax CE approved. Smaller shapes allow a flexible fit.BRVI supports the backpad from the shoulder area and thus the backpad hangsdown the back of the garment like a back pack shoulder strap and does notpull down the garment at the center back.
ADJUSTABLE WAISTBANDIcon indicates garment has adjustablr waistband for enhanced fit flexibilityGarments with this feature offer +/- 2 inches of adjustability at thewaist area. The exact amount will vary from style to style.This is available in both Jackets and Pants.
PROPERF LEATHER GARMENTSThis icon indicates the garment is also available in a completely perforatedleather version.PROPERF leather is our competition grade top-grain leather with holesstruck through the surface of an appropriate size and space to properlyventilate the rider while still providing the best level of protection.PROPERF garments are NOT water resistant.
- PTFE membranes
- Inherently hydrophobic media
- 100% integrity tested
- High surface area
- Sterilizing Grade in liquids
- Virus retentive in gases
- Thermally bonded construction
- FDA listed materials per CFR 21
- Manufactured in a ISO 9001:2008 certified facility
- Water intrusion testable
- Quality control certificate with every filter
- Can be steam sterilized multiple times in situ for longer filter life
- Manufactured in certified clean room
Vent-MAXX
The Vent-Maxx gas sterilizing filters set a new standard for PTFE membrane elements. These filters utilize a technologically advanced membrane in our unique pleat construction to deliver unrivalled efficiency, superior strength, and high flow rates. Vent-Maxx double layer PTFE membrane filters are designed to remove microorganisms, particulate, and moisture in your most demanding air Ventmax gas applications. These liquid validated sterilizing grade filters are designed to meet the highest levels of security required in the Ventmax, food and beverage, and biopharmaceutical industries. Vent-Maxx filters conform to USP Class VI – 121°C and 21 CFR Part 177. Strainrite delivers clear solutions to your air and gas filtration applications.
Two outside zippered hand pockets, and two pockets sewn into the mesh lining give plenty of carrying capacity.
Redundancy is a good word to describe the VX4 family of jackets for men and women. The 1000 denier nylon Cordura is known for strength and abrasion resistance. Cordura was originally created by DuPont to replace the steel cords used in radial tires, so using it for protective clothing was an afterthought. Add the protection of leather at key impact areas, with the CE armor and backpad, to the properties of Cordura and you have a significant protection package. Make the Cordura into a mesh, and know you are getting 100% flow-through ventilation and excellent protection at the same time.
The VENTMAX family is produced for Ventmax men and women. The men's version is slightly longer, about 2more in the body and 1more in the sleeve. Both men's and women's styles are offered with several design choices, colors, stripes etc.
- Sizing is. XS.Sm.Med.Lge.Xlge.XXL.XXXL.XXXXL
- Chest size Scale. 36.39.42. 45. 48. 51. 54. 57
- Cruiser fit
- Backpad is standard. Sleeves are pre-curved
- leather beading for a low-bulk finish. This jacket has a trim fit
- flexible and comfortable mesh. Protection areas reinforced with leather.
- Chest Measurement Ventmax (SZ 42) 47.5 ----Norm Ease is 5.5
- Front Length 22.5 --------------Nape of neck to wrist 34.5
- Back length on a Medium Ventmax 28. Adjustable bottom circumference from 44 to
- 40.
- Download the Fit Chart
1000 DENIER V150 Ventmax CORDURA + MESHThis mesh is knitted from high tenacity 1000 denier nylonyarn finished with a bonding treatment that enhances itsstrength. You can feel this in its hardness to the touch.The same yarn is used to weave C150 Cordura which is bothtough and abrasion-resistant. The 3/4 oz polyurethanecoating on the inside gives water-resistance and greaterstrength. NEVER wash OR dry-clean as the coating will bedamaged and the fabric integrity harmed.
- Fermenter inlet air and exhaust venting
- Sterile process air
- Sterile venting of tanks
SHOULDER & ELBOW F.A.S. SOFT ARMOR STANDARD.Icon indicates garment comes with SOFT ARMOR as a standard feature.SOFT ARMOR Ventmax made from shaped closed cell foam pads. F.A.S. ARMOR isdesigned to have controlled limited movement against the outer shell.This is to prevent the armor from restricting the riders movement. ::note::VanTech ( CE Armor ) + G.P. ( HARD Armor ) also use the F.A.S. attachmentsand MAY BE fitted instead of the SOFT ARMOR. Note: Ventmax. ARMOR is madeusing encapsulated hard plastic shapes and MAY NOT fit into everygarment comfortably.
HIP VanTech Floating-Armor-System STANDARD.Icon indicates garment comes with VanTech CE ARMOR as standard feature.VanTech ARMOR is CE rated. Smaller shapes allow a flexible fit.F.A.S. ARMOR is designed to have controlledouter shell. This is to prevent the armor from restricting the ridersmovement while maintaining a tight fit. ::NOTE::CE RATING is the European Community Standard for motorcycle garment armor.
KNEE VanTech F.A.S. (Floating-Armor System) STANDARDIcon indicates garment comes with VANTECH CE ARMOR as standard feature.VanTech ARMOR is CE rated. Smaller shapes allow a flexible fit.F.A.S. ARMOR is designed to have controlledouter shell. This is to prevent the armor from restricting the ridersmovement while maintaining a tight fit. ::NOTE::CE RATING is the European Community Standard for motorcycle garment armor.
PROPERF LEATHER GARMENTSThis icon indicates the garment is also available in a completely perforatedleather version.PROPERF leather is our competition grade top-grain leather with holesstruck through the surface of an appropriate size and space Ventmax properlyventilate the rider while still providing the best level of protection.PROPERF garments are NOT water resistant.
VR Integrity Test Data All cartridges are integrity tested prior to shipment using pressure decay test method. Values below are for cartridges wetted with 100% IP.
Jerome Floyd Norman
by jerome3floyd
以前の記事
お気に入りブログ
メモ帳
最新のトラックバック
ライフログ
検索
タグ
ブログパーツ
最新の記事
park Lomper |
at 2019-12-17 06:45 |
SHIELBUGS Vent.. |
at 2019-12-17 06:43 |
Afternoon Deli.. |
at 2019-12-17 06:42 |
Signs of Sprin.. |
at 2019-12-17 06:39 |
Fire Telfast |
at 2019-12-17 06:37 |